Every Chimiver product is a set of several factors: from the in-depth study of its function to the analysis of every aspect that can make it more effective and longer lasting. These are the concepts that guide the Chimiver research in the choice of components, always among the new raw materials and accepting the suggestions of users.
Adesivo poliuretanico bicomponente anallergenico, per l’incollaggio di parquet tradizionale di tutti i formati e prefinito (preverniciato) su sottofondi in cemento e cemento impermeabilizzato. Certificato EC1R PLUS. Può contribuire al raggiungimento del QI CREDITO 4.1. secondo i parametri GEV del 03 Marzo 2009 perché conforme ai requisiti del protocollo di certificazione LEED.
Chimiver Institutional Video
Two-component epoxy-PU adhesive to be used for gluing any type of wooden floor onto concrete subfloors, waterproof concrete and, with previous suitable treatment, onto notabsorbent preexisting floorings (ceramics, tiles, marble, palladian, gres, ect.). Suitable for gluing onto heated subfloors.
Single-component adhesive based on a silane-terminated prepolymer (MS technology). Hypoallergenic, free of any hazardous label. Easy to clean. Recommended for gluing any type of traditional and pre-finished wooden floors and suitable subfloors. Extreme (superior) technology than PU systems. Certified: EC1R Plus Very good elasticity that last over the time. Can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, it meets the certification LEED protocol (Leadership in Energy and Environmental Design).
Certificato EC1R Plus
TUBULAR BAGS_Adesiver Elastic
Chimiver Video_Adesiver Elastic
Two-component epoxy-PU adhesive hypoallergenic, to be used specifically for gluing any type of wooden floor onto a concrete subfloors, waterproof concrete and, with previous suitable treatment, onto not-absorbent preexisting floorings (ceramics, tiles, marble, palladian, gres, ect.). Recommended for gluing onto heated subfloors.
Self-expanding single-component adhesive for quick repairs. Characterized by high tenacity, hardness and high adhesion power.
Chimiver Istitutional Video
Single-component alcohol-based adhesive for gluing traditional and pre-finished wooden floors.
Two-component vinyl adhesive in cartridge for quick wooden floors repairs. Also used for gluing brass, doorsills and instantly securing wooden steps glued with two-component adhesives.
Odorless two-component epoxy-polyurethane adhesive. Suitable to glue several wood species on wall and ceiling. Its high thixotropy gives an excellent initial adhesion with no shrinkage.
Healing protective impregnator of wood with strong residual insecticide action. Leaves no grease and does not develop harmful gases. Medical and Surgical Aid Ministerial Authorization N°18563.
Two-component solvent-based polyurethane colored fire-retardant lacquer in line with D.M. 6 Marzo 1992 following the UNI 9796 norm. The class of reaction of fire is Italian 1. Available in RAL, NCS and on request.
Reazione al fuoco
Fast vinylic adhesive for skirting boards quick setting. Perfect for vertical fittings of baseboards, profiles, etc.., on condition that one of the two surfaces soaks the product. Attakko has a quick setting on concrete, stone, brick, pottery, wood and polystyrene. High solid content, excellent thixotropy, low water content and very good stickiness.
Two-component aliphatic polyurethane primer with UV-absorber to preserve from the future oxidation and yellowing of the wood.
Two-component not-yellowing aliphatic polyurethane varnish with excellent scratch and abrasion resistances and high surface hardness.
Not-yellowing single-component primer with not-oxidating properties, preserving the wood colour.
Single-component product specifically designed to improve, the adhesion of epoxy-polyurethane and polyurethane adhesives to not-absorbent surfaces such as ceramics, tiles, etc. Also thinner for epoxypolyurethane adhesives.
Anhydrous thinner prepared with high graded solvents for diluting two-component polyurethane solvent-based lacquers.
Thinner for tools cleaning (rollers, brushes) used for solvent-based lacquering. No white precipitate formation.
Thinner for tools cleaning (rollers, brushes) used for water-based lacquering.
Slow evaporation thinner recommended for polyurethanic single and two-component solvent based lacquers.
Retardant thinner for water based lacquers.
Odorless synthetic thinner for wax, oil-based colours and oil-urethane lacquers.
High graded alcohol-based thinner for the dilution of primers and epoxy-polyurethane adhesives.
Detergent for the removal of fresh adhesive spots from pre-finished wooden floor.
Water-based odorless detergent for the removal of fresh adhesive spots from pre-finished wooden floor.
Two-component polyurethane varnish with excellent chemical and physical characteristics. Available in LD and SATINATA versions.
Single-component polyurethane lacquer characterised by high scratch resistance, elasticity and surface hardness.
Two-component polyurethane lacquer which is colored, flexible, hard and scratch-resistant for marking lines in wooden floor playing courts. Available in RAL colours, NCS and on request.
Two-component solvent-based fire-retardant lacquer in line with D.M. 6 Marzo 1992 following the UNI 9796 norm. The class of reaction of fire is Italian 1. Available: SPORT versionfor sportive wooden floors. Determination of the Coefficient of Friction of floors - B.C.R.A. Method. Certified DIN 51130 - R 10.
Coefficiente d'attrito per pavimenti BCRA
Single-component water-based lacquer for wooden floors with reduced content of volatile organic compounds. Has high abrasion resistance and to heavy traffik. CERTIFIED EC1 PLUS, Ü-Mark of Conformity. ECØ V can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, because it meets the certification LEED protocol (Leadership in Energy and Environmental Design). The product has ECOLABEL certification (www.ecolabel.eu): european mark of ecological quality that confirms the Company’s commitment towards the environment.
Water-based single-component polyurethane primer that gives the wood floor a "white washed" effect. Thanks to the high dry residue, it is characterized by a very good covering power, which allows to fill the wood pores with one coat. The degree of whiteness is a function of the number of applied coats. Furthermore ECO WHITE considerably reduces the yellowing of the woody surface while keeping the bleached effect unchanged over time.
Single-component water-based super toning primer with high coverage, to be used as first coat in the lacquering process. Giving to the wood a very warm colour, especially on oak. No overlaps are left on the floor and excellent sanding properties.
Single-component polyurethane-acrylic waterbased UV curing lacquer in situ for wooden floors. ECOFAST UV has high abrasion and traffic resistances allowing its use for high traffic surfaces. ECOFAST UV is UV curing with portable UV machines where a fast walkability is required. Available in LD, SL and OP versions.
Acrylic single-component water-based solvent-free product. It has to be used mixed with the dust coming from sanding down wood floors to give a smoothing finish. Thanks to its high viscosity, it has excellent filling power allowing a quick sanding of the floor without shrinkings.
Two-component water-based primer used as first coat for the water-based cycle over sportive wooden floors. Thanks to the high solid content, it has a high coverage property, able to fill the pore of the wood with a single coat. Easy to sand and it gives a good tone to the wood. It meets the slip resistance required by EN 14904 standards and it's classified as EN 13501-1: BflS1. It is recommended and certified by the International Basketball Federation (FIBA).
Sport Line FIBA
Two-component water-based primer suggested as first coat of wooden floors water-based cycles. Thanks to the high solid content, has high coverage properties, filling the pore of the wood just with a single coat. Easy to sand giving the same oxidation to the wood as a normal solvent-based primer.
Ciclo/Cycle ECOPRIME HS120 + ECOSTAR 2K
Two-component water-based toning primer suggested as first coat of wooden floors water-based cycles. Thanks to the high solid content, has high coverage properties, filling the pore of the wood just with a single coat. Easy to sand giving the same oxidation to the wood as a normal solvent-based primer.
Water-based single component acrylicpolyurethane primer recommended for the lacquering of wooden floors where it is request to finish the work in just a day. Has excellent chemical and physical properties as high solid content, very fast drying and it will not stain the wood.
Single-component water-based lacquer characterized by a high solid content, high abrasion and traffic resistances, giving a warm and pleasant final appearance.
Two-component water-based polyurethane lacquer with high solid content. High abrasion and sole marks resistances allowing its use for high traffic surfaces. Certifications: surface resistance to cold liquids EN 12720 and chemicals agents EN 13442. Determination of the Coefficient of Friction of floors - B.C.R.A. Method (Cycle ECOPRIME HS 120 + ECOSTAR 2K).
Resistenza agli agenti chimici e ai liquidi freddi
Two-component colored water-based polyurethane lacquer for wooden floors with high elasticity, hardness and high chemical and mechanical resistances. Has to be over-varnished with Ecostar 2K. Available in RAL, NCS colors and on request. To be used with teflon roller 10 mm.
Two-component water-based polyurethane lacquer with natural wood look effect. Recommended on light wood species. Nanotechnological.
Chimiver Video_Ecostar 2K Natural
Single-component pigmented polyurethane water-based paint for the line-marking of sportive wooden floors. Available in RAL colors SPORT and NCS. It is recommended and certified by the International Basketball Federation (FIBA).
Two-component water-based polyurethane fire-retardant lacquer for wooden floors, following the D.M. 6th March 1992 (UNI 9796 standards). Fire-retardant product with Italian class 1. Has been formulated in order to meet the highest anti slip standard requirements for sport wooden floors. Is in conformity with European standards for sportive wooden floors meeting EN14904 standard’s requirements.
Determinazione della resistenza all'abrasione - Determinazione della brillantezza
Istituto Giordano_Determinazione della resistenza allo slittamento
Single-component water-based acrylic primer for wooden floors with excellent chemical and physical properties: transparency, easy sandability and adequate solid content.
Two-component water-based hight durability polyurethane lacquer for wooden floors, characterized by high solid content, easy to apply, high pore wettability even on brushed wood floors giving a warm and pleasant shade to the floor treated. Has high abrasion and Black Heel Mark resistances allowing its use for high traffic surfaces.
Determinazione della resistenza all'abrasione
Video Chimiver_Ecotraffik 2k
Two-component water-based polyurethane lacquer with natural wood look effect. The wooden floors treated have matt, natural and antireflection effects. Suitable for coating dark and light woods. Excellent chemical and physical resistance, suitable for heavy traffic floors.
Two-component polyurethane primer for wooden floors characterized by an extraordinary covering ability.
EN_FONDO WR 306
INDUSTRIAL COATINGS LINE
IT_EN_INDUSTRIAL COATINGS LINE
Natural oil treatment with 100% solid content. Available on colored version on request.
Lios B 100
Natural oil treatment for wooden floors. Protects the wood in deep, enhancing the softness and the natural look of the wood. Available on colored version.
SUNDECK W OIL water-based impregnating oil for outdoor wood
CLEAN GARDEN Intensive alkaline concentrate cleaner for landscaping synthetic turf
VELUREX CLEANER STAR Intensive cleaner for wooden floors