Technical Sheets

Products

Every Chimiver product is a set of several factors: from the in-depth study of its function to the analysis of every aspect that can make it more effective and longer lasting. These are the concepts that guide the Chimiver research in the choice of components, always among the new raw materials and accepting the suggestions of users.



ADDITIVO HD 2-10

Additive in specific emulsion, able to improve the mechanical resistance and increase the abrasion resistance of ECOSTAR 2K HD per Pavimenti in resina 10:2.




ECOSTAR 2K HD PER PAVIMENTI IN RESINA 10:2 (A+B)

Two-component water-based polyurethane lacquer recommended for residential use, particularly in public buildings (medical, offices, etc.). Ideal even in the presence of pets. Applied on various surfaces, it creates a smooth, transparent, tough, walkable, resistant to abrasion coating. Determination of antislip properties following DIN 51130 (cycle PRYMAREN + ECOSTAR 2K HD per Pavimenti in Resina). Determination of the Coefficient of Friction of floors B.C.R.A. Destinations: is recommended for a lacquering protective treatment in the following cases: epoxy coatings, epoxy-cement coatings, polyurethane resins on floors and walls. Do not use on floors where the motor vehicles park.




ECOSTAR 2K HD per Pavimenti in Resina Colorata (A+B)

Two-component water-based polyurethane colored lacquer for cement/ microcement with high elasticity, hardness and high chemical and mechanical resistances. Suggested when restoring of old colored or shaded surfaces is required. It has to be over-varnished with ECOSTAR 2K HD per Pavimenti in resina 10:2. Available in RAL, NCS colors and on request.




PRYMAREN

Single-component insulating acrylic water-based primer for cements, microcements before the lacquering. Suitable also for mineral supports, increasing the resistance to water and to alkaline surfaces.