Every Chimiver product is a set of several factors: from the in-depth study of its function to the analysis of every aspect that can make it more effective and longer lasting. These are the concepts that guide the Chimiver research in the choice of components, always among the new raw materials and accepting the suggestions of users.
Additive in specific emulsion, able to improve the mechanical resistance and increase the abrasion resistance of ECOSTAR 2K HD per Pavimenti in resina 10:2.
Chimiver Institutional Video
Video Chimiver_Ecostar 2k HD Pavimenti in resina - Additivo Hd 2-10
Speciale additivo, a base di ioni d'argento, che aggiunto alle vernici a base acqua crea una barriera meccanica ad azione igienizzante. L'aggiunta di tale additivo mantiene inalterate tutte le caratteristiche della vernice stessa (durezza, gloss, viscosità, resistenze chimiche e meccaniche ecc).
Additivo per vernici all'acquaAdditivo igienizzante
Bactericidal activity determination
Video Chimiver Istituzionale
Two-component aliphatic polyurethane lacquer with very high superficial hardness and superior elasticity, formulated with not-yellowing resin and doped with UV absorbers and anticracking additives to further improve the resistance to yellowing and to wheater. Recommended for the interior and exterior lacquering of cement and stone, paintings of industrial floors subject to heavy mechanical loads, epoxy resin, epoxy cement, polyurethane resins on floors and walls, and microcement with high/low porosity. Available in NO SLIP version. Determination of the Coefficient of Friction of floors - B.C.R.A Method.
BCRA high porosity
BCRA low porosity
Two-component water-based polyurethane lacquer recommended for residential use, particularly in public buildings (medical, offices, etc.). Ideal even in the presence of pets. Applied on various surfaces, it creates a smooth, transparent, tough, walkable, resistant to abrasion coating. Determination of antislip properties following DIN 51130 (cycle PRYMAREN + ECOSTAR 2K HD per Pavimenti in Resina). Determination of the Coefficient of Friction of floors B.C.R.A. Destinations: is recommended for a lacquering protective treatment in the following cases: epoxy coatings, epoxy-cement coatings, polyurethane resins on floors and walls. Do not use on floors where the motor vehicles park.
Two-component water-based polyurethane colored lacquer for cement/ microcement with high elasticity, hardness and high chemical and mechanical resistances. Suggested when restoring of old colored or shaded surfaces is required. It has to be over-varnished with ECOSTAR 2K HD per Pavimenti in resina 10:2. Available in RAL, NCS colors and on request.
Two-component aliphatic polyurethane colored lacquer with very high superficial hardness and superior elasticity. Recommended for the interior and exterior lacquering of cement and stone, paintings of industrial floors subject to heavy mechanical loads, epoxy cement, epoxy resin, cement and microcement with high/ low porosity, epoxy cement, polyurethane resins on floors and walls. Available in RAL, NCS colors and on request.
Single-component insulating acrylic water-based primer for cements, microcements before the lacquering. Suitable also for mineral supports, increasing the resistance to water and to alkaline surfaces.
iIsulating single-component acrylic water-based primer with not-yellowing resins suitable for the application of ECOSTAR 2K HD per Pavimenti in resina (10-2) range of products. Its special formulation improves the adhesion of water-based lacquer on microcements and mineral support increasing the resistance to water and to alkaline surfaces. The not-yellowing and high curing properties recommend the application of PRYMAREN CREAM onto light or dark microcement.
SUNDECK W OIL water-based impregnating oil for outdoor wood
CLEAN GARDEN intensive alkaline concentrate cleaner for landscaping synthetic turf
ECOFILL TECH acrylic single-component water-based solvent-free joint filler for wooden floors