Technical Sheets

Products

Every Chimiver product is a set of several factors: from the in-depth study of its function to the analysis of every aspect that can make it more effective and longer lasting. These are the concepts that guide the Chimiver research in the choice of components, always among the new raw materials and accepting the suggestions of users.



BLOCCA RETE

Ready to use waterbased fine-intert charged anchoring primer, specific for fixing subfloor nets.




CHIM-CONTACT

Water-based acrylic and inert materials primer used to improve the adhesion of plaster and smoothings on not-absorbent subfloors with excellent bond strenght providing a rough coupling surface.




CHIMIGRIP

Single-component odorless water-based acrylic adhesion promoter for indoor use, specific for absorbent and not-absorbent floor preparation, before laying of RASOCHIM range of products on pre-existing substrates.




NIVELAND 10R



PRYMER 100

Single-component 100% polyurethane primer recommended as anti-dust superficial consolidate treatment and damp proof membrane (DPM) on cement subfloors. Recommended has anti-dust treatment on anhydrite subfloors.




PRYMER A

Ready to use single-component water-based anti-dust primer based on a nano-dispersion of resin with guarantee high penetration even in low absorption subfloors and anhydrite and heated subfloors. Suitable for reactive glues. Superficial consolidation.




PRYMER EPOX WETT (A+B+C)

Three-component primer developed to create damp proof membrane (DPM) on cement subfloors. Recommended for absorbent and notabsorbent subfloors such as ceramic tiles, marble, ect. previously treated.




PRYMER FAST 500

Single-component fast drying primer with very low emissions of volatile organic compounds. Recommended as anti-dust, superficial consolidate treatment and Damp Proof Membrane (DPM) on cement subfloors. Recommended as anti-dust treatment on anhydrite and heated-subfloors. Certified EC1. It can contribute to the achievement of QI CREDITO 4.1 according to the parameters of the GEV dated 03 March 2009, because it meets the certification LEED protocol.




PRYMER GUM

High performances dispersion additive added to smoothing compounds to improve their mechanical and adhesion characteristics.




PRYMER PUB 77

Single-component solvent-based polyurethane primer, recommended as anti-dust, superficial and deep consolidate treatment and damp proof membrane (DPM) on cement subfloors. Recommended as anti-dust treatment on anhydrite subfloors. Suitable to consolidate old wooden floors.




PRYMER SF 1105 (A+B)

Two-component water-based epoxy primer recommended has anti-dust, superficial consolidate treatment and damp proof membrane (DPM) on cement subfloors. Recommended as anti-dust treatment on anhydrite subfloors.




PRYMER W

Single-component water-based anti-dust primer recommended to reinforce dust-creating subfloors and to prepare irregular subfloors before levelling with RASOCHIM range of products.




PRYMER W 30 K

Inorganic silicate water-based solution for the deep consolidation of dusty and poor cement subfloors.




PRYMER WB 328 S (A+B+C)

Three-component water-based epoxy primer developed to create damp proof membrane (DPM) on cement subfloors. Final colour after the application: beige.




QUARZ

Graded blend of quartz powder to be added to PRYMER SF 1105 (ratio 1:4) or PRYMER PUB 77 (ratio 1:7) for the preparation of synthetic mortars for application in thinkness. Also mixable with two-component epoxy-polyurethane adhesives.




RASOCHIM 1400 M

Cementitious self-levelling for interior works floorings up to 10 mm thicknesses.




RASOCHIM FAST

RASOCHIM FAST Fast drying cementitious self-levelling for interior works of industrial, commercial and public floorings up to 30 mm thicknesses.




RASOCHIM MAXI

Fast drying self-levelling compound for thicknesses from 5 to 40 mm.




RASOCHIM TOP

Fast drying cementitious self-levelling for interior works of industrial, commercial and public floorings up to 20 mm thicknesses.