Every Chimiver product is a set of several factors: from the in-depth study of its function to the analysis of every aspect that can make it more effective and longer lasting. These are the concepts that guide the Chimiver research in the choice of components, always among the new raw materials and accepting the suggestions of users.
Additive in specific emulsion, able to improve the mechanical resistance and increase the abrasion resistance of ECOSTAR 2K HD per Pavimenti in resina 10:2.
EN_ADDITIVO_HD_2-10
Chimiver Catalogue
RE Line
Chimiver Institutional Video
Video Chimiver_Ecostar 2k HD Pavimenti in resina - Additivo Hd 2-10
Two-component aliphatic polyurethane lacquer with very high superficial hardness and superior elasticity, formulated with not-yellowing resin and doped with UV absorbers and anticracking additives to further improve the resistance to yellowing and to wheater. Recommended for the interior and exterior lacquering of cement and stone, paintings of industrial floors subject to heavy mechanical loads, epoxy resin, epoxy cement, polyurethane resins on floors and walls, and microcement with high/low porosity. Available in NO SLIP version. Determination of the Coefficient of Friction of floors - B.C.R.A Method.
EN_DUROLACK_MC_50_EXTRA_ALIFATICA
BCRA high porosity
BCRA low porosity
Two-component water-based polyurethane lacquer recommended for residential use, particularly in public buildings (medical, offices, etc.). Ideal even in the presence of pets. Applied on various surfaces, it creates a smooth, transparent, tough, walkable, resistant to abrasion coating. Determination of antislip properties following DIN 51130 (cycle PRYMAREN + ECOSTAR 2K HD per Pavimenti in Resina). Determination of the Coefficient of Friction of floors B.C.R.A. Destinations: is recommended for a lacquering protective treatment in the following cases: epoxy coatings, epoxy-cement coatings, polyurethane resins on floors and walls. Do not use on floors where the motor vehicles park.
EN_ECOSTAR_2K_HD_per_Pavimenti_in_resina_(10-2)
Antislip properties
Two-component water-based polyurethane colored lacquer for cement/ microcement with high elasticity, hardness and high chemical and mechanical resistances. Suggested when restoring of old colored or shaded surfaces is required. It has to be over-varnished with ECOSTAR 2K HD per Pavimenti in resina 10:2. Available in RAL, NCS colors and on request.
EN_ECOSTAR_2K_HD_per_Pavimenti_in_Resina_Colorata
Two-component aliphatic polyurethane colored lacquer with very high superficial hardness and superior elasticity. Recommended for the interior and exterior lacquering of cement and stone, paintings of industrial floors subject to heavy mechanical loads, epoxy cement, epoxy resin, cement and microcement with high/ low porosity, epoxy cement, polyurethane resins on floors and walls. Available in RAL, NCS colors and on request.
EN_LACCATURA_ALIFATICA_MC_50_COLORATA
Single-component insulating acrylic water-based primer for cements, microcements before the lacquering. Suitable also for mineral supports, increasing the resistance to water and to alkaline surfaces.
EN_PRYMAREN
Video Chimiver_Prymaren
Single-component lacquer based on water dispersion resins and mineral powders; developed for application on asphalt and concrete surfaces as pedestrian areas, cycling lanes and multi-sport areas. It can be applied both on new and old surfaces.
EN_RESIN_FINISH_SPORT_W1K
Two-component aliphatic polyurethane colored lacquer with very high superficial hardness and superior elasticity. Available in RAL, NCS and on request.
EN_RESIN_GREEN_UP_FLOOR_2K
Water-based paint for the line-marking of indoor and outdoor. Characterized by superb hiding ability, quick drying and excellent weatherability (heavy showers resistance). Available sample.
EN_TRAFFIC_LANE_NT
SUNDECK W OIL water-based impregnating oil for outdoor wood
CLEAN GARDEN intensive alkaline concentrate cleaner for landscaping synthetic turf
ECOFILL TECH acrylic single-component water-based solvent-free joint filler for wooden floors