Technical Sheets

Products

Every Chimiver product is a set of several factors: from the in-depth study of its function to the analysis of every aspect that can make it more effective and longer lasting. These are the concepts that guide the Chimiver research in the choice of components, always among the new raw materials and accepting the suggestions of users.



ADESIVER 327 PU (A+B)

Adesivo poliuretanico bicomponente anallergenico, per l’incollaggio di parquet tradizionale di tutti i formati e prefinito (preverniciato) su sottofondi in cemento e cemento impermeabilizzato. Certificato EC1 PLUS. Può contribuire al raggiungimento del QI CREDITO 4.1. secondo i parametri GEV del 03 Marzo 2009 perché conforme ai requisiti del protocollo di certificazione LEED.




ADESIVER 501 EP (A+B)

Two-component epoxy-PU adhesive to be used for gluing any type of wooden floor onto concrete subfloors, waterproof concrete and, with previous suitable treatment, onto notabsorbent preexisting floorings (ceramics, tiles, marble, palladian, gres, ect.). Suitable for gluing onto heated subfloors.




ADESIVER ELASTIC

Single-component adhesive based on a silane-terminated prepolymer (MS technology). Hypoallergenic, free of any hazardous label. Easy to clean. Recommended for gluing any type of traditional and pre-finished wooden floors and suitable subfloors. Extreme (superior) technology than PU systems. Certified: EC1R Plus Very good elasticity that last over the time. Can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, it meets the certification LEED protocol (Leadership in Energy and Environmental Design).




ADESIVER HERCULES (A+B)

Two-component epoxy-PU adhesive hypoallergenic, to be used specifically for gluing any type of wooden floor onto a concrete subfloors, waterproof concrete and, with previous suitable treatment, onto not-absorbent preexisting floorings (ceramics, tiles, marble, palladian, gres, ect.). Recommended for gluing onto heated subfloors.




ADESIVER RPM

Self-expanding single-component adhesive for quick repairs. Characterized by high tenacity, hardness and high adhesion power.




ADESIVER STE

Single-component alcohol-based adhesive for gluing traditional and pre-finished wooden floors.




ADESIVER ULTRA V

Two-component vinyl adhesive in cartridge for quick wooden floors repairs. Also used for gluing brass, doorsills and instantly securing wooden steps glued with two-component adhesives.




ADESIVO 2K VERTICAL WALL (A+B)

Odorless two-component epoxy-polyurethane adhesive. Suitable to glue several wood species on wall and ceiling. Its high thixotropy gives an excellent initial adhesion with no shrinkage.




PARKETKOLL KX

Single-component water-based dispersion adhesive with a quick setting time. Recommended for the reparation and the consolidation of wooden floors.




PARKETTKOLL FLOT D/3

Single-component adhesive in D3 class suitable for gluing between tongue and groove of pre-finished floating wooden floors or laminated floating floors. The adhesive meets the D3 class according to DIN EN 204. Application: with special tube.




PARKETTKOLL L

Single-component water dispersion adhesive for gluing lamellar and lampaquet wooden floors. Good tenacity, good hold and long-lasting elasticity.




PARKETTKOLL LISTONI

Single-component water dispersion adhesive for gluing massive wooden floors. Permanent elasticity, excellent seal.




PARKETTKOLL TOP RU

Single-component water dispersion adhesive for gluing all types of wooden floors. Excellent elasticity, it maintains unchanged its characteristics over time.




SIGOL (A+B)

Two-component epoxy-PU adhesive to be used for gluing any type of wooden floor onto concrete subfloors, waterproof concrete and, with previous suitable treatment, onto notabsorbent preexisting floorings (ceramics, tiles, marble, palladian, gres, ect.). Potentially suitable for gluing onto heated subfloors.




UNISIL

Single-component adhesive based on a silane-terminated prepolymer (MS technology). Hypoallergenic, free of any hazardous label. Easy to clean. Recommended for gluing any type of traditional and prefinished wooden floors and suitable subfloors. Extreme (superior) technology than PU systems. Certified: EC1R, CCA, Acoustic barrier, Heat conductor. Approved by the best subfloor heating system producers. Superb elasticity that last over the time. Can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, it meets the certification LEED protocol (Leadership in Energy and Environmental Design).