Additive in specific emulsion, able to improve the mechanical resistance and increase the abrasion resistance of ECOSTAR 2K HD per Pavimenti in resina 10:2.

Special additive formulated with silver ions, that, when added to water-based lacquers creates a mechanical barrier with hygienizing action. ADDITIVO SANIPLUS -ADDI19W- doesn't alter any of the lacquer's properties (hardness, gloss level, viscosity, mechanical and chemical resistances etc).

Additive for water-based lacquersHygienizing additive

Single-component solvent-based, polychloroprene double-buttering adhesive for gluing profiles, resilients floors and covings where an immediate bond is required. Suitable for absorbent and notabsorbent subfloors.

Two-component epoxy-PU adhesive to be used for gluing any type of wooden floor onto concrete subfloors, waterproof concrete and, with previous suitable treatment, onto notabsorbent preexisting floorings (ceramics, tiles, marble, palladian, gres, ect.). Suitable for gluing onto heated subfloors.

Glue for parquetGlue for wooden floorsTwo-component epoxy-polyurethane glueGlue for heated subfloors

Single-component adhesive based on a silane-terminated prepolymer (MS technology). Hypoallergenic, free of any hazardous label. Easy to clean. Recommended for gluing any type of traditional and pre-finished wooden floors and suitable subfloors. Extreme (superior) technology than PU systems. Certified: EC1 Plus Very good elasticity that last over the time. Can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, it meets the certification LEED protocol (Leadership in Energy and Environmental Design).

Glue for parquetGlue for wooden floorsSingle-component silane glueGlue for heated and cooled subfloors

Single-component polyurethane adhesive with very low VOC emission used to restore the jointing strips between synthetic turf sheets, for indoor and outdoor use even in presence of residual humidity.

Acrylic water-based thixothropic adhesive characterized by high solid content, excellent spreadability and low water content. Specific for indoor of: carpet and needle punched textile with any backing provided they are dimensionally stable; linoleum up to 3 mm thickness; vinyl floors supported by felt; PVC flooring in rolls or tiles; textile floor coverings; semi-rigid vinyl; rubber sheets up to 3 mm thickness; PVC flooring and coverings; flooring and wall covering made by coco with back in latex; styrofoam livings and syrofoam flooring. Suitable for absorbent and semi-absorbent subfloors.

Acrylic water-based adhesive characterized by high solid content, excellent spreadability and low water content. Specific for indoor laying of: carpet and needle punched textile with any backing provided they are dimensionally stable; linoleum up to 3 mm thickness; vinyl floors supported by felt; PVC flooring in rolls or tiles; textile floor coverings; semi-rigid vinyl. Suitable for absorbent and semiabsorbent subfloors.

Acrylic water-based thixothropic adhesive characterized by high solid content, excellent spreadability and low water content. Specific for indoor of: carpet and needle punched textile with any backing provided they are dimensionally stable; linoleum up to 3 mm thickness; vinyl floors supported by felt; PVC flooring in rolls or tiles; textile floor coverings; semi-rigid vinyl; rubber up to 3 mm thickness; PVC flooring and coverings; flooring and wall covering made by coco with back in latex; styrofoam linings and styrofoam flooring; LVT (luxury vinyl tiles) flooring. Suitable for absorbent and semi-absorbent subfloors.

Two-component polyurethane adhesive with high elasticity and toughness suitable for gluing indoor and outdoors the following: PVC flooring in rolls or tiles; rubber flooring in tiles or sheets; rubber sports flooring; antishock flooring in tiles or sheets; vinyl flooring and textile flooring. Suitable for absorbent and not-absorbent subfloors.

Acrylic water-based adhesive characterized by a permanent tack (also after the complete drying), very high solid content, excellent spreadability and low water content. Suitable to hold in place loose lay resilient and carpet tiles with any type of backing and to prevent them slipping on different substrates, loose lay floors can be easily removed and/or replaced. Suitable for absorbent and not-absorbent subfloors.

Single-component alcohol-based adhesive for gluing traditional and pre-finished wooden floors.

Glue for parquetGlue for wooden floorsSingle-component alcool-based glue

Odorless two-component epoxy-polyurethane adhesive. Suitable to glue several wood species on wall and ceiling. Its high thixotropy gives an excellent initial adhesion with no shrinkage.

Glue for vertical gluingTwo-component epoxy-polyurethane adhesiveGlue for several wood species

Concentrated, water-based, no-slip solution that does not require rinsing, it's not aggressive and does not alter the surface. It is ideal for preventing and limiting the risk of falling. It can be used on most hard surfaces (lacquered wooden floors, ceramic, stoneware, marble, resin, microcement, PVC, LVT, etc). Furthermore, thanks to its formulation it does not stain and doesn't film.

Healing protective impregnator of wood with strong residual insecticide action. Leaves no grease and does not develop harmful gases. Medical and Surgical Aid Ministerial Authorization N°18563.

Fast vinylic adhesive for skirting boards quick setting. Perfect for vertical fittings of baseboards, profiles, etc.., on condition that one of the two surfaces soaks the product. Attakko has a quick setting on concrete, stone, brick, pottery, wood and polystyrene. High solid content, excellent thixotropy, low water content and very good stickiness.

Two-component aliphatic polyurethane primer with UV-absorber to preserve from the future oxidation and yellowing of the wood.

Not-yellowing single-component primer with not-oxidating properties, preserving the wood colour.

Single-component odorless water-based acrylic adhesion promoter for indoor use, specific for absorbent and not-absorbent floor preparation, before laying of RASOCHIM range of products on pre-existing substrates.

Intensive alkaline concentrate cleaner for sportive and landscaping synthetic turf surfaces as tennis court, golf, recreation parks, balcony, terraces ect. Thanks to its particular formulation it acts effectively and quickly on the surface. It is additived with nanoparticles which guarantee on the surface a deep cleaning and a long lasting action. Cleans and leaves a pleasant meadow floral fragrance. Available in Ready to use version.

Intensive antistatic alkaline ready to use cleaner for landscaping synthetic turf. Thanks to its particular formulation it acts effectively and quickly on the surface. It contains an antistatic emulsion that helps the absorption and prevention of dust formation. Additived with nanoparticles guarantee on the surface a deep cleaning and a long lasting action even in presence of pets. Cleans and leaves a pleasant floral fragrance.

Intensive concentrated alkaline cleaner suitable for cleaning all padel courts both indoor and outdoor. Thanks to its special formulation containing tea tree, acts effectively and quickly on the surface. CLEAN PADEL is prepared using special nanoparticles that ensure an intensive and thorough cleaning. Its special formulation contains three essences unwelcome to insects: it cleanses and refreshes the treated surface leaving a fresh and pleasant scent of citrus, lemon and eucalyptus.

Single-component product specifically designed to improve, the adhesion of epoxy-polyurethane and polyurethane adhesives to not-absorbent surfaces such as ceramics, tiles, etc. Also thinner for epoxypolyurethane adhesives.

Thinner for tools cleaning (rollers, brushes) used for solvent-based lacquering. No white precipitate formation.

Slow evaporation thinner recommended for polyurethanic single and two-component solvent-based lacquers.